A Surge Protection Device Type 2 (SPD Type 2) is a crucial component in modern electrical systems, providing protection against transient overvoltages caused by indirect lightning strikes, switching operations, and other power disturbances. Installed in distribution boards, this device is key to safeguarding equipment and ensuring electrical reliability across residential, commercial, and industrial environments.

What is a Type 2 Surge Protection Device?

A Type 2 SPD is designed to protect the electrical installation and connected equipment from transient voltage surges. It operates by diverting excess voltage to the ground, limiting the voltage supplied to safe levels.

Type 2 devices are typically installed downstream of the main service entrance or in sub-distribution boards, working in conjunction with Type 1 and Type 3 SPDs for layered protection.

Key Features

Voltage Limiting: Reduces overvoltage to acceptable levels.
MOV (Metal Oxide Varistor) Technology: Ensures rapid response to voltage spikes.
Thermal Disconnection Mechanism: Prevents fire hazards in case of device failure.
Visual Fault Indicator: Easy identification of device status for maintenance.

Applications

Residential Homes: Protects TVs, computers, and other electronics.
Commercial Buildings: Shields HVAC systems, elevators, and lighting.
Industrial Plants: Safeguards sensitive machinery and automation systems.
Data Centers: Ensures uninterrupted operation of critical infrastructure.

Why You Need a Type 2 SPD

Protection from Switching Surges: Often caused by internal operations such as motor starts or transformer switching.
Indirect Lightning Protection: Essential in areas prone to storms, reducing risk of equipment damage.
Cost Efficiency: Prevents expensive downtime and equipment replacement.
Compliance with Standards: Meets IEC 61643 and other global regulations for surge protection.

Installation Guidelines

Install in the main or sub-distribution board as close to the incoming supply as possible.
Ensure proper grounding and bonding for maximum effectiveness.
Combine with Type 1 SPDs (for direct lightning strikes) and Type 3 SPDs (for fine equipment protection) for full system defense.

Selecting the Right Type 2 SPD

When choosing a surge protection device Type 2, consider:

Nominal Discharge Current (In): Typically rated around 5–20 kA.
Maximum Discharge Current (Imax): Represents the device’s peak protection capacity.
Voltage Protection Level (Up): The lower the better for protecting sensitive electronics.
Modular Design: Allows easy replacement without rewiring.
Certification: Look for IEC, CE, or UL marks for guaranteed compliance and performance.

Integration With Other Components

Type 2 SPDs work seamlessly with:

LV Distribution Boxes: Enhances safety by managing and protecting power distribution.
Heat Shrink Termination Kits: Ensures secure cable terminations for reliable electrical continuity.
Lightning Arresters: Complements external surge protection systems.

Conclusion

A surge protection device Type 2 is not just a recommendation—it's a necessity in today's electrified environments. Whether protecting your home electronics or critical industrial systems, investing in the right SPD Type 2 ensures system integrity, cost savings, and peace of mind.

Prioritize quality, professional installation, and periodic maintenance to get the most from your surge protection strategy. Stay safe, stay protected.

Surge Protection Device Type 2: Essential Safety for Low-Voltage Systems